Adding services to VMware firewall

These are some of the notes i'd collected from vmware kb site

Creating custom firewall rules in VMware ESXi 5.x

There is a defined set of firewall rules for ESXi 5.x for Incoming and Outgoing connections on either TCP, UDP, or both.

You may be required to open the firewall for the defined port on TCP or UDP that is not defined by default in Firewall Properties under Configuration > Security Profile on the vSphere Client.

This article provides instructions on creating custom firewall rules in ESXi 5.x via the command line.

Note: Custom firewall rules can be created only for those ports that are defined by default in the Firewall Properties under Security Profile on the vSphere Client.

By default, there is a set of predefined firewall rules that can be enabled/disabled for the ESXi host from the vSphere Client.

These firewall services can be enabled/disabled for the defined ports (UDP/TCP) from the vSphere Client. However, if you need to enable the service on a protocol that is not defined, you must create new firewall rules from the command line.

For example, the DNS Client service can be enabled/disabled only on UDP port 53.

To enable DNS for TCP:
1. Open an SSH connection to the host.
2. List the firewall rules by running the command:

# esxcli network firewall ruleset list

Name            Enabled
--------------  -----------------
sshServer       true
sshClient       false
nfsClient       true
dhcp            true
dns             true
snmp            true
ntpClient       false
CIMHttpServer   true
CIMHttpsServer  true
CIMSLP          true
iSCSI           true

Note: On the vSphere Client, the DNS service is open on port 53 for UDP only.

To enable the DNS service on port 53 for TCP:

1. Back up the /etc/vmware/firewall/service.xml file by running the command:

# cp /etc/vmware/firewall/service.xml /etc/vmware/firewall/service.xml.bak

2. Modify the access permissions of the service.xml file to allow writes by running the chmod command:

To allow writes:

# chmod 644 /etc/vmware/firewall/service.xml

To toggle the sticky bit flag:

# chmod +t /etc/vmware/firewall/service.xml

3. Open the service.xml file in a text editor.
4. Add this rule to the service.xml file:

<service id="0032">
<id>DNSTCPOut</id>
<rule id='0000'>
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>53</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>

Rule set configuration file example:

<ConfigRoot>
<service id='0000'>
<id>serviceName</id>
<rule id = '0000'>
<direction>inbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>80</port>
</rule>
<rule id='0001'>
<direction>inbound</direction>
<protocol>tcp</protocol>
<porttype>src</porttype>
<port>
<begin>1020</begin>
<end>1050</end>
</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>


5. Revert the access permissions of the service.xml file to the read-only default by running the command:

# chmod 444 /etc/vmware/firewall/service.xml

6. Refresh the firewall rules for the changes to take effect by running the command:

# esxcli network firewall refresh

or

# localcli network firewall refresh

With ESXi 5.1.x, changes to the existing service.xml file is persistent after reboot.

7. List the rules again to confirm by running the command:

# esxcli network firewall ruleset list

Name            Enabled
--------------  -----------------
sshServer       true
sshClient       false
nfsClient       true
dhcp            true
dns             true
snmp            true
ntpClient       false
CIMHttpServer   true
CIMHttpsServer  true
CIMSLP          true
iSCSI           true
DNSTCPOut       true
Notes:
• The new DNSTCPOut firewall rule allows outgoing connections on TCP port 53. New firewall rules and services are also viewable under the Host Configuration section in Security Profile using the vSphere Client.
• ESXi 5.0 Update 1 (build 623860) has a built-in outbound DNS Client running on port 53 (TCP/UDP), which is enabled by default. No action is required to configure DNS client if you are using ESXi 5.0 Update 1.

Extra resources from VMware kb site:

~Sujith Emmanuel

Comments

Popular posts from this blog

How to configure proxy for common linux apps

How to add a disk to LVM

How to migrate MediaWiki?